(2) C.A.P. TMP-1 Cooling Hydroponic Garden Thermostat Temperature Controllers
Feature
- The TMP-1 controls (lowers) temperature by turning on an exhaust fan
- The external temperature probe is highly accurate & reliable
- Temperature control range: 50-115° F -- Temperature operating range: 32-120° F
- Relay operating life: 100,000 electrical
- Main power voltage: 120 volts -- Maximum amperage: 15 amps
Product Detail
- ASIN: B00RKAK0S0
- Item model number:
- Average Customer Review: Customer Reviews
Product Description
The TMP-1 allows you to control the temperature within your growing environment. Just connect your air conditioner or fan, then set the temperature that you wish to maintain. If that temperature is exceeded, the outlet turns on your equipment until the temperature decreases below the set temperature by 5 degrees. Comes with a 3' remote sensor. The TMP-1 is rated for 15 amps @ 120 volts.
The TMP-1 is extremely easy to use. Once connected, the temperature will be maintained at the level you set. Plug your exhaust fan or A/C into the outlet on the front face. Plug the TMP-1 into a standard 15 amp, 120 volt outlet. The TMP-1 can be secured to the receptacle it is plugged into by using the supplied screw in place of the standard receptacle cover-plate screw.
Adjust the TMP-1 by using the large knob on the front of the unit. When the temperature rises to the preset level, the cooling device plugged into the TMP-1 will be energized. The TMP-1 will turn OFF the cooling device after the temperature has been reduced by approximately 5° F.
The TMP-1 is extremely easy to use. Once connected, the temperature will be maintained at the level you set. Plug your exhaust fan or A/C into the outlet on the front face. Plug the TMP-1 into a standard 15 amp, 120 volt outlet. The TMP-1 can be secured to the receptacle it is plugged into by using the supplied screw in place of the standard receptacle cover-plate screw.
Adjust the TMP-1 by using the large knob on the front of the unit. When the temperature rises to the preset level, the cooling device plugged into the TMP-1 will be energized. The TMP-1 will turn OFF the cooling device after the temperature has been reduced by approximately 5° F.
